DCRS-7600 InstallManual
Transmission
Indicator
1.4.2.1.3 Front Panel Port Description
The MRS-7604-M12GB provides 12 SFP (Mini GBIC) Gigabyte fiber transceiver
slots.
The following SFP transceivers are supported by the MRS-7604-M12GB:
SFP-SX-L
SFP-LX-L
SFP-LX-20-L
SFP-LX-40-L
SFP-LH-70-L
SFP-LH-120-L
SFP-GT
1.4.2.1.4 Front Panel – Console Port
The MRS-7604-M12GB provides a RJ-45 (receptacle) Console serial port. Users can
connect to hosts via this port to perform system debugging, configuration, maintenance,
management and host software loading.
Table 1-2 MRS-7604-M12GB Console description
Property
Connector
Connector type
Baud rate
Supporting service
1.4.2.1.5 Front Panel – Management Port
The MRS-7604-M12GB provides a RJ-45 (receptacle) Ethernet port. Users can
connect through this management port to hosts for program loading or to connect to
remote devices for remote management (e.g., a managing workstation). Note: when
connecting to the host, a cross-over cable should be used.
Table 1-3 MRS-7604-M12GB management port description
Property
Act
Blinking (Green)
Gigabit SFP MM 850 nm, 500m (SX)
Gigabit SFP SM 1310 nm, 10Km (LX)
Gigabit SFP SM 1310 nm, 10Km (LX)
Gigabit SFP SM 1310 nm, 40Km (LHX)
Gigabit SFP SM 1550 nm, 70Km (ZX)
Gigabit SFP SM 1550 nm, 120Km (ZX)
Gigabit SFP to Copper cable RJ45
RJ-45 (receptacle)
RS-232
9600bps (default)
Connects to character terminals
Connects to PC serial port and running terminal emulator
on PC.
1-15
Chapter 1 Product Overview
Sending
data
Specification
Specification
or
receiving