Panasonic WV-S6131 Important Information Manual page 20

When connecting to a network using a PoE hub
Before starting the installation, check the entire system configuration. The following illustration gives
a wiring example of how to connect the camera to the network via a PoE device (hub).
Powered speaker
Microphone
Powered speaker
Microphone
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE hub is not used, each network camera must be connected to a 12 V DC power
supply.
• When using 12 V DC, power supply from a PoE hub or router is not required.
Confirmation
monitor
PoE device (hub)
Ethernet cable
(category 5e or
better, straight)
LOCK
OP EN
Confirmation
monitor
20
Ethernet cable
(category 5e or better,
straight)
PC
Ethernet cable
(category 5e or better,
straight)
* Use an Ethernet cable (category
5e or better, cross) when directly
connecting the camera to a PC.