Panasonic WV-S6131 Important Information Manual page 17

【Rear view】
S6131
S6111
②12 V DC power supply terminal
① Network connector
S6130
②12 V DC power supply terminal
INITIAL SET button
① Network connector
①Network connector (RJ45)
Connect an Ethernet cable (category 5e or better) to the network connector.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum length of the Ethernet cable (locally procured) is 100 m.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
■ Terminals
⑤EXT I/O terminals
⑤EXT I/O terminals
③Audio input connector
③Audio input connector
④Audio output connector
17
④Audio output connector
Safety wire holder
⑥ M onitor out
connector
Safety wire holder