Helmet Holder - Honda XL1000V Varadero Owner's Manual

HELMET HOLDER

The helmet holder is located below the
seat.
Remove the seat (page 56).
Route the either end of the helmet holder
wire (1) through the helmet's D-ring (2).
Hook the loops of the wire onto the
helmet holder (3).
Install the seat and lock it securely.
The helmet holder wire is furnished in the
tool kit (page 88).
∆
Riding with a helmet attached to the
holder can interfere with the rear
wheel or suspension and could cause
a crash in which you can be seriously
hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
WARNING
(1) Helmet holder wire
(2) Helmet D-ring
(3) Helmet holder
57