Honda XL1000V Varadero Owner's Manual page 145

4. After cleaning, rinse the motorcycle
thoroughly with plenty of clean water.
Strong detergent residue can corrode
alloy parts.
5. Dry the motorcycle, start the engine,
and let it run for several minutes.
6. Test the brakes before riding the
motorcycle. Several applications may be
necessary to restore normal braking
performance.
7. Lubricate the drive chain immediately
after washing and drying the motorcycle.
Braking efficiency may be temporarily
impaired immediately after washing the
motorcycle.
Anticipate longer stopping distance to
avoid a possible accident.
134
Finishing Touches
After washing your motorcycle, consider
using a commercially-available spray
cleaner/polish or quality liquid or paste
wax to finish the job. Use only a non-
abrasive polish or wax made specifically
for motorcycles or automobiles. Apply the
polish or wax according to the
instructions on the container.
If a surface on your motorcycle is chipped
or scratched, your Honda dealer has
touchup paint to match your motorcycle's
colour.
Be sure to use your motorcycle's colour
code (page 90) when you buy touch-up
paint.