Honda XL1000V Varadero Owner's Manual page 36

Digital clock
Shows hour and minute. To adjust the
time, proceed as follows:
1. Turn the ignition switch ON.
2. Press and hold the clock button (2) for
more than 2 seconds. The clock will be
set in the adjust mode with the display
flashing.
(1) Digital clock
(2) Clock button
3. Push the clock button until the desired
time is displayed.
• The time is advanced by one minute,
each time the clock button is pushed.
• The time is advanced by ten minutes,
when the clock button is pushed and
held.
4. Push the clock button after five seconds
pass with not doing anything to enter
the time.
When the ignition switch is turned OFF
while set the clock in the adjust mode,
the adjustment will be cancelled.
25