Features; (Not Required For Operation) Steering Lock; Helmet Holder - Honda XR250 Tornado 2016 Owner's Manual

XR250 TORNADO

FEATURES

(Not required for operation)
Steering Lock
The steering can be locked when the ignition key (1)
is in the "LOCK" position.
To lock the steering, turn the handlebar all the way to
the left or right, turn the ignition key to LOCK while
pushing in. Remove the key.
To unlock the steering, turn the key to OFF.
C
!
aution
Do not turn the key to LOCK while riding the
motorcycle; loss of vehicle control will result.
To lock
(1)
(A)
(B)
(C)
To unlock
(1) Ignition key
(A) Push in
(B) Turn to LOCK
(C) Turn to OFF

Helmet Holder

The helmet holder (1) is on the left side below the
left side cover.
Insert the ignition key (2) into the helmet holder and
turn it counterclockwise to unlock.
Hang your helmet on the holder pin (3). Turn the key
clockwise to lock the holder and then remove the key.
(3)
(2)
(1)
W
!
arning
Riding with a helmet attached to the holder
P
can interfere with the rear wheel or suspension
and could cause a crash in which you can be
seriously hurt or killed.
Use the helmet holder only while parked. Do
P
not ride with a helmet secured by the holder.
43
(1) Helmet holder
(2) Ignition key
(3) Holder hook