NEC EXPRESS5800/120Md Series User Manual page 127

Figure 4-25. Attaching the Device Side Rails
9. Install the media device into the bay as follows (see Figure 4-27):
Move any cables in the bay out of the way.
!
Align the rails on the media device with the supports in the bay.
!
Slide the device into the bay until it locks in place.
!
Connect the power cable (A) and data cable (B) to the device.
!
Figure 4-26. Installing a Removable Media Device
10. If tower-based system, close the front door of the cabinet.
11. If rack-mounted system, reinstall the rack front panel. See Installing the
Rack-Mount Upgrade Kit earlier in this chapter
12. Plug in the power cords and power up the system.
13. Run the BIOS Setup to configure the device.
Upgrading Your System 4-35