NEC EXPRESS5800/120Md Series User Manual page 105

Figure 4-7. Repositioning the Diskette Drive Assembly
5. Install the new rack front panel on the front of the chassis as follows (see
Figure 4-8):
Position the new rack panel on the front of the chassis so the three screw
!
holes on each side of the rack panel align with the screw holes on both
sides of the chassis.
Adjust the rack panel so that its square hole is directly over the CD-
!
ROM tray and doesn't interfere with any movement of the tray.
Secure the rack panel to the front of the chassis with the six screws
!
provided with the panel.
Figure 4-8. Installing the Rack Front Panel
Upgrading Your System 4-13