EN
Basic Functions
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the
Making a Call
1. Pick up the handset and press the
Result: The
icon appears on the LCD.
2. Dial a telephone number.
3. To end the call, either press the
or replace the handset on the base.
Note
:
To make a call to the last number you dialed,
Redial
use the
16.
47
EN ::: 47
key.
key.
feature. For details, see page
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Enter a telephone number (
Check it. You can also use the
insert a pause.
key
Note
:
If you make a mistake while entering a
number, press the
the last digit.
2. When the number appears correctly, press
the
key.
up to 24 digits
key to
Erase
soft key to clear
).