Sanyo CDP-MT500 Instruction Manual page 17

Changing a programme
To add a new track to a programme:
1. In the stop or pause mode, press the PROG/MEMORY button repeatedly until
(MUSIC CD) or
2. Select a track as explained above.
3. Press the PROG/MEMORY button.
To change a track:
1. In the stop mode, press the PROG/MEMORY button repeatedly until the track num-
ber to be replaced is displayed.
2. Select a track as explained above.
3. Press the PROG/MEMORY button.
Note:
• Programmed details cannot be partially deleted or inserted.
• The programmes will be lost after turn off the power or the disc compartment is opened.
(MP3 CD)blinks on the track number section.
16