2-1. Rear Cover Removal
=>
= >
= >
=>
=>
Remove the rear cover fixing screws indicated and pull the
rear cover backwards. Take care when removing the rear
cover not to damage the speaker cable [Disconnect the
speaker connector] a speaker is fitted inside the rear cover.
2-3. Chassis Removal and Refitting
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2 DISASSEMBLY
2-2. Front Control Module Removal
Remove the two screws fixing the user control module to the
front underside of the set. The control module drops down to
allow access to the boards.
When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
- 16 -
Screws