Troubleshooting - Zanussi ZOP37982XC User Manual

Table of Contents

Advertisement

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate or operate
the oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quick-
ly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "C3".
The display shows "F102".
Possible cause
The oven is not connected to
an electrical supply or it is con-
nected incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is ac-
tivated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The temperature is too low or
too high.
You left the dish in the oven for
too long.
The cleaning function does not
operate. You did not fully close
the door, or the door lock is
defective.
You did not fully close the
door.
The door lock is defective.
Remedy
Check if the oven is correctly
connected to the electrical
supply (refer to the connection
diagram if available).
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Adjust the temperature if nec-
essary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Fully close the door.
Fully close the door.
Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
If the display shows "F102"
again, contact the Custom-
er Care Department.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents