Fuel Filter; Fuel Pump - Malaguti PHANTOM F 12 MAX 125 Workshop Manual

Phantom f 12 max series
Table of Contents

Advertisement

A
- CHASSIS
A
CHAPTER
REMOVING THE FUEL FILTER
(Remove side casings, rear cowling, strut and
footboard)
CAUTION!!!
Make sure the tank is empty.
Loosen clamp A (F.78), clamp B (F.78) and take
the petrol filter off its support.
Caution!!! When refitting, avoid nar-
row bends of the pipes.
REMOVING THE FUEL PUMP
(Remove side casings, rear cowling, strut and
footboard)
Detach the fuel inlet pipe (A - F.79), the fuel outlet
pipe (B - F.79) and the vacuum pipe (C - F.79).
Undo the screws (V2 - F.79).
Caution!!! When refitting, connect the
pipes in their correct position.
REMOVING THE FUEL TANK
(Remove side casings, rear cowling, strut, foot-
board and lower fairing)
CAUTION!!!
Make sure the tank is empty.
Before emptying the tank, wait for the
engine to cool down. Use a manual
pump.
Release the petrol filter and disconnect the probe
connector.
Undo the screws (V2 - F.80) on both sides.
Shift the tank towards the rear side to enable the
front fixing tabs to move beyond the coupling. You
can now pull the tank out from the front side.
Caution!!! When refitting, perform
above operations in reverse order.
52
PAGE
CHASSIS
DISASSEMBLY
A
SECTION 3
B
B
V
2
C
V
2
ISSUE
A
F.78
F.79
F.80
09.03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phantom f 12 max 200

Table of Contents