A
- CHASSIS
A
CHAPTER
To access the parking light bulbs, remove the
lamp sockets (A - F.23).
To remove the entire headlight assembly, undo the
screws (V2 - F.24) and unscrew the light adjust-
ment knob (A - F.24).
Caution!!! When refitting the adjust-
ment knob, install all parts in the right
sequence.
To adjust the beam, act on the knob (A) as fol-
lows:
- tighten to raise the beam
- loosen to lower the beam
REMOVING THE FRONT INDICATORS
Caution!!! There is no need to remove
the upper fairing; it can be placed on
the front wing covered beforehand
with scratch-proof material.
Undo the screws (V2 - F.25).
To gain access to the light bulb, remove the lamp
socket (A - F.25), by turning it 15° anti-clockwise.
Caution!!! This operation is symmetri-
cal.
32
PAGE
CHASSIS
DISASSEMBLY
A
SECTION 3
A
V
2
V
2
ISSUE
F.23
F.24
A
F.25
09.03