Undo the screws (V2 - F.37).
Raise the helmet holder and pull out battery ca-
bles (A-B - F.37), exhaust pipe (C - F.37) and seat
lock cable.
Caution!!! When refitting, take care to
put the exhaust pipe, battery cables
and seat lock cable back into their
openings.
COMPONENTS THAT CAN BE ACCESSED BY REMOVING THE HELMET HOLDER
By removing the helmet holder, you can gain access to the following components:
• Fuel probe (A)
• Carburettor (B)
• Control unit connector (C)
A
C
09.03
ISSUE
CHASSIS
DISASSEMBLY
C
B
SECTION 3
A
- CHASSIS
CHAPTER
A
V
2
B
PAGE
A
F.37
F.38
37