Table of Contents
Advertisement
6. CONNECTING BLUETOOTH ENABlED MOBIlE
PHONES, GPS OR MP3 (A2DP) DEVICES
Multiple device Connectivity ("MdC") with Bluetooth
compatible devices
Thanks to MDC technology the SRC-System offers parallel connectivity
with up to two other SRC-System headsets and with one of the fol-
lowing Bluetooth devices listed below*:
➤ Mobile Phone (either directly or via a GPS device)
➤ GPS device
➤ A2DP enabled MP3 Player or Adapter
➤ Bluetooth Adapter
➤ Bluetooth Adapter
MP3
MP3
player
player
Up to 300 m / 328 yd
Up to 300 m / 328 yd
Bike-to-Bike
Bike-to-Bike
Intercom Range*
Intercom Range*
Built-in
Built-in
FM radio
FM radio
NOTE: If you plan to use your mobile phone while using a Bluetooth GPS
device, then you should pair your mobile phone to the GPS and not to the
src-system headset.
* see restrictions under 9.4 b
28
QG SRC 131 - QG0160.indd 28
GPS
GPS
Mobile phone
Mobile phone
& A2DP connectivity
& A2DP connectivity
6.1 MobIle PHone
To use your Bluetooth mobile phone with the SRC-System, you must
first pair the two devices.
NOTE: If you plan to use a GPS device in parallel with your mobile phone, then
you should pair your mobile phone to the GPS device and not to the SRC-
System. In such case, skip this section and proceed directly with section 6.2.
Pairing is a one time process. Once the headset is paired to a
specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
If the connection between the phone and headset is lost, tap the
Mobile Button on your headset to reconnect the devices.
PaIRING THE HEadSET TO a BLUETOOTH MObIlE PHONE:
1. Turn on your phone and make sure its Bluetooth function is activated.
Turn on your headset by pressing the Mobile Phone Button for at least
three seconds resulting in three blue flashes.
2. With the SRC-System turned ON, press and hold the Mobile
Button for at least six seconds until the Red and Blue Lights begin
rapidly alternating.
3. Search for Bluetooth devices on your phone by following the phone's
instructions. Consult your phone's User Manual for more information.
4. After a few seconds the phone will list "SRCS" (incl. its software
version) as a discovered device. Select it and follow your phone's
instructions to accept the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset
will begin flashing slowly in Blue.
NOTE: Not all Bluetooth mobile phones can broadcast Bluetooth Stereo
music (A2DP), even if the phone has an MP3 player application. Consult
your mobile phone's User Manual for more information.
With some mobile phones, you may need to tap the Mobile Button to con-
nect the headset to the phone after pairing is complete. The src-system
will automatically connect to the last phone connected to the headset.
10/20/09 11:29 AM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SRC System and is the answer not in the manual?
Questions and answers
How do you change language from German to English on the SRC system
To change the language from German to English on the SCHUBERTH SRC System:
1. Make sure the headset is on standby.
2. Press and hold both the CHANNEL “A” and CHANNEL “B” buttons at the same time for 3 seconds.
3. The voice menu will start.
4. Follow the voice instructions to select English as your preferred language.
This answer is automatically generated