Speed Control; Activation; Setting A Desired Speed; Varying The Speed - Jeep CHEROKEE 2018 User Manual

SPEED CONTROL

The Speed Control switches are located on
the right side of the steering wheel.
Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel

Activation

Push the on/off button to activate the Speed
Control, "CRUISE CONTROL READY" will
appear on the instrument cluster display to
indicate the Speed Control is on. Push the
on/off button a second time to turn the sys-
tem off, "CRUISE CONTROL OFF" will ap-
pear on the instrument cluster display to
indicate the Speed Control is off. The system
should be turned off when not in use.
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could acci-
dentally set the system or cause it to go
faster than you want. You could lose con-
trol and have an accident. Always leave the
system off when you are not using it.

Setting A Desired Speed

Turn the Speed Control on. When the vehicle
has reached the desired speed, push the SET
(+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the
selected speed. Once a speed has been set, a
message "CRUISE CONTROL SET TO MPH
(km/h)" will appear indicating what speed
was set. A cruise indicator lamp, along with
set speed will also appear and stay on in the
instrument cluster display when the speed is
set.

Varying The Speed

Once the Speed Control has been activated,
the speed can be increased or decreased.
To Increase Speed
When the Speed Control is set, you can in-
crease speed by pushing the SET (+) button.
147