Jeep CHEROKEE 2018 User Manual page 270

To Send A Text Message
1. Push the Uconnect Phone Button
on the steering wheel.
2. Wait for the beep.
3. Say "Text."
4. Uconnect will prompt you "Say the phone
number, or full name and phone type of
the contact you want to send a message
to."
5. Wait for the beep and say a contact that is
in your phonebook, or a mobile phone
number that you would like to send the
message to.
Sample Commands For Voice Text Reply And Voice Texting
Example Command
"Text John Smith"
"Text 123 456 7890"
"Show messages"
"Listen to/view (message number four, for example)"
"Forward text/message to "John Smith"
"Forward text/message to "123 456 7890"
268
6. Uconnect will prompt you "Please say the
message that you would like to send." (If
you do not hear this prompt, you may not
have an
Uconnect Access).
7. Wait for the beep, and then dictate any
message up to 140 characters. If you
exceed 140 characters, you will hear the
following prompt: "Message was too long;
your message will be truncated."
8. Uconnect will then repeat the message
back to you.
"Reply"
active subscription with
Send a message to specific contact in address book
Send 123 456 7890 a message from your phonebook
See recent text messages listed by number on Uconnect screen
Hear messages or read it on Uconnect screen
Send a voice text reply to a current message
Forward current text to specific contact in address book
Forward current text to specific phone number
9. Uconnect will prompt you: "To add to your
message, say "Continue"; To delete the
current message and start over, say "Start
Over"; to send the current message, say
"Send"; to hear the message again, say
"Repeat".
10. If you are happy with your message and
would like to send it, wait for the beep
and say "Send".
11. Uconnect will then say "Sending your
message."
Action