Advertisement
Advertisement
Related Manuals for VelectriX Ascent+ 29 MTB
Summary of Contents for VelectriX Ascent+ 29 MTB
- Page 1 Instruction Manual: VelectriX Ascent+ 29 MTB...
-
Page 2: Table Of Contents
CONTENTS Safe Riding Recommendations Page 2 Pre-Ride Checklist Page 3 Display and Controls Page 4 Maintenance Page 8 Warranty Page 9 Contact Details Page 10 Service Log Page 11 Model Specification Page 12 Page 1... -
Page 3: Safe Riding Recommendations
Your VelectriX bike must be returned to your servicing dealer after 250kms or 6 weeks from date of purchase, whichever comes first, to re-tension the spokes. Spokes should then be re-tensioned every 1500kms. -
Page 4: Pre-Ride Checklist
Pre-Ride Checklist Check your bike for any loose nuts, bolts or fixings. Check tyre pressures on your bike are correct. Please always refer to the tyre manufactures suggested levels on the side of the tyre. The following can be used as a guide only: Ascent+ 29 (30-50psi) Check the tyres on your bike for any visible damage, wear and tear or bald spots. -
Page 5: Display And Controls
LCD Display and Controls Your electric bike is equipped with a LCD display, mounted on the left side of the handlebar. The display will show battery level capacity, speed, odometer, trip meter, power assistance level, light function and walk assist function. Turn On The LCD Display There are three buttons on the display unit: Power and plus and minus buttons... - Page 6 Should the bike have an electrical fault, an “error code” will appear on the display. If this occurs, please contact your local VelectriX dealer, who will be able to deal with the issue for you. Please do not attempt to fix any problems without first contacting your VelectriX dealer.
- Page 7 Battery Instructions To turn the battery ON/OFF, you should remove the battery from the bike and press the ON/OFF button underneath the battery case (Pic 1). You do not have to turn the battery OFF after every ride, only when the bike is not being used for long periods of time.
- Page 8 The Battery Charger ONLY use the battery charger supplied with this bike. Battery Care The battery should be charged under dry conditions and at room temperature. Do not store your battery at temperatures below -10 °C & above 60 °C ...
-
Page 9: Maintenance
9 months or 1500kms, whichever comes first. Excluding the electronics, motor, battery and wiring, your VelectriX bike is a normal bike, with normal components. Your dealer will be able to explain to you the general care and maintenance required for the components of your bike. -
Page 10: Warranty
Warranty All VelectriX bikes are covered by the following warranty and conditions of use: Battery 2 years Motor 2 years Frame 5 years Other Components 1 year (excluding consumables: cables, tyres, tubes, hand grips). The warranty is only valid for the first owner and is not transferrable. -
Page 11: Contact Details
Contact Details If you have any questions, concerns or technical issues with any VelectriX product please contact your VelectriX dealer immediately. Dealer Name: Dealer Contact Number Address Sales Person Sales Date VelectriX Australian Service Centre Contact Details: VelectriX Pty Ltd... -
Page 12: Service Log
Service Log Date Notes Next Service Due Date: Date Notes Next Service Due Date: Date Notes Next Service Due Date: Date Notes Next Service Due Date: Date Notes Next Service Due Date: Page 11... -
Page 13: Model Specification
Model Specification VelectriX Ascent+ 29 MTB Frame: Aluminium VelectriX Ascent MTB Size: 17” (medium), 19” (large) Fork: Suntour SF13-XCT-HLO 100mm travel Colour: Satin black with blue & grey decals Tyres: Maxxis 29” x 2.10” MTB Brakes: Tektro 285 hydraulic with 180mm rotors...