Z-World Wildcat BL2000 User Manual page 63

Table A-1 lists the electrical, mechanical, and environmental specifications for the BL2000.
Feature
Microprocessor
Ethernet Port
Flash Memory
SRAM
Backup Battery
Digital Inputs
Digital Outputs
Analog Inputs
Analog Outputs
Dual-Purpose Analog or Digital
Inputs
Relay Output
Serial Ports
Serial Rate
Connectors
Real-Time Clock
User's Manual
Table A-1. BL2000 Specifications
BL2000
10Base-T, LNK and ACT LEDs
Panasonic CR2330 or equivalent 3 V lithium coin type, 265 mA·h
standard using onboard battery holder; optional 3 V, 950 mA·h
solder-in battery available; external battery connector
11 inputs hardware-configurable pull-up or pull-down,
± 36 V DC, switching threshold 2.4 V typical
10 outputs sinking or sourcing, +40 V DC,
200 mA maximum per channel (2 channels can sink up to 750 mA each)
Four 12-bit res., Four 10-bit res.,
± 10 V DC, 1 MΩ, ± 10 V DC, 1 MΩ,
up to 4,000
samples/s
Two 12-bit res.,
0–4 V DC,
update rate 12 kHz
Five at 12 , Seven at 12
kΩ
12-bit res.,
0–48 V DC
SPDT with snubbers
max. contact settling time 4 ms
4 serial ports:
•
two RS-232 or one RS-232 (with CTS/RTS)
•
one RS-485, onboard network termination and bias resistors
•
one 5 V CMOS-compatible programming port
Max. sustained rate = CLK/64
one RJ-45 (Ethernet)
one 2 × 5, 2 mm pitch (serial programming port)
one power jack for AC adapter
four 12-terminal screw connectors (14 AWG/1.5 mm
and digital I/O, relay
BL2010 BL2020
®
Rabbit 2000 at 22.1 MHz
256K (standard)
128K (standard)
Four 12-bit res.,
± 10 V DC, 1 MΩ,
up to 4,000 up to 4,000
samples/s samples/s
Two 12-bit res.,
None
0–4 V DC,
update rate 12 kHz
, Five at 12
kΩ
10-bit res., 12-bit res.,
0–48 V DC 0–48 V DC
*
: 1 A @ 30 V DC, 300 mA @ 120 V AC
(uses one digital output)
Max. burst rate = CLK/32
Yes
BL2030
None
Four 10-bit res.,
± 10 V DC, 1 MΩ,
up to 4,000
samples/s
None
, Seven at 12 ,
kΩ kΩ
10-bit res.,
0–48 V DC
2
wire) for analog
59