Step 5: Select Bound Interface Name; Step 6: Sip Domain Name; Step 7: Configure Sip Proxy Settings; Step 8: Configure Second Voip Account - NetCommWireless NF10WV Setup Manual

5 Please select the correct Bound Interface Name from your Internet WAN Service Connection or you can select
Any_WAN
6 Please note for SIP Domain Name: Please leave it blank unless required by your VoIP Provider.
7 Tick Use SIP Proxy for SIP Account 1, Use SIP Outbound Proxy for SIP Account 1 and Use SIP Registrar for SIP Account
1 and fill them with the SIP Domain name as given by your VoIP Provider.
8 If you have 2nd VoIP account then please also tick Use SIP Proxy for SIP Account 2, Use SIP Outbound Proxy for SIP
Account 2 and Use SIP Registrar for SIP Account 2 and fill them with the SIP Domain name as given by your VoIP
Provider; otherwise don't tick them.
9 Tick Account Enabled 1 if you only use 1 VoIP account and tick Account Enabled 2 as well if you use 2 VoIP accounts.
10 Type in your Authentication Name, Cid Name and Cid Number by using your VoIP Phone number and use the same
number for Authentication name as well or use the correct VoIP username if it's different from your phone number.
11 Type in your VoIP password as given to you by your VoIP Service Provider.
12 Click the Apply button.
2 of 4
© NetComm Wireless 2017
Generic VoIP Setup Guide