Osd2153P Operation; Single Unit Configuration - Optical Systems Design OSD2153P Operator's Manual

2.3

OSD2153P OPERATION

This section outlines the OSD2153P connections and switch settings. Read this section carefully for
trouble free set up and operation.
There are two possible configurations for the OSD2153P namely Single Unit Configuration and Dual
Unit configuration.
Figure 11 is a flow chart of the OSD2153P Link Loss Forwarding (LLF) function and operation.
FIGURE 11: LINK LOSS FORWARDING FUNCTION
2.3.1

SINGLE UNIT CONFIGURATION

The single unit configuration enables the user to connect the OSD2153P to any 1000Base-X switch via
the fiber port. The fixed RJ45 copper port can be connected to a switch or PC using standard CAT5 or
higher cable.
1000Base-X Switch
PAGE 15
OPTICAL SYSTEMS DESIGN
OSD2153P
Fiber
FIGURE 12: SINGLE UNIT CONFIGURATION
OSD2153P OPERATOR MANUAL
PC
Copper
DOC ID: 10115804