Operation; Indicator Lamps - Makita DCL501 Instruction Manual

Pull the ends of the belt up so that they are at
least 80 mm (3") from the top of the stopper.
Attach the hose hook at around the midpoint
along the hose. Store the shoulder belt in the
hose hook when not using it.
1. Shoulder belt
1
1. Hose hook
1
1. Shoulder belt
2. Hose hook
1
2

OPERATION

Switch action
To start the cleaner, simply press the
ON (2/1) button.
To switch off, press the OFF (0) button. To
change the cleaner speed, press the
ON (2/1) button. The first press on this button
is for high speed and the second press for
low speed. Each press on this button repeats
the speed change alternatively.

Indicator lamps

The indicator lamps light up or flash to
indicate the status of the appliance.
1
2
Filter Lighting on The filter is dirty. Clean the
indicator
(orange
lamp)
Blinking
rapidly
Battery Blinking
indicator
(red lamp)
Lighting on The battery is very low and the
NOTE:
• Always remove dust frequently. Suction
power will be reduced if there is too much
dust in cleaner.
1. ON (2/1) button
2. OFF (0) button
1
2
1. Filter indicator
(orange lamp)
2. Battery indicator
(red lamp)
filter. Refer to Section
"Cleaning the filter (after
work)".
The filter is clogged with dust.
Wash the filter. Refer to
Section "Cleaning the filter
(thoroughly cleaning)".
The battery power is getting
low.
appliance will stop. Charge the
battery.
7