Table of Contents
Advertisement
To remove attachment, pull it off the cleaner while
pressing and holding the arms of the release button.
1
Fig.8
► 1. Release button 2. Arm of release button
3. Attachment with lock function 4. Suction inlet
When using attachment without lock function
NOTICE:
To install attachment without lock func-
tion, insert it into the suction inlet of the cleaner
by twisting it as shown in the figure. To detach
attachment, release it from the cleaner by twist-
ing it as shown in the figure. Avoid twisting the
attachment in the direction opposite to the arrow
in the figure as it may loosen the cyclone unit.
Fig.9
OPERATION
CAUTION:
Do not move your face close to the
air vent when operating the cleaner. If foreign objects
are blown into eyes, it may result in personal injury.
NOTICE:
Avoid using the cleaner in a horizontal
or upward facing position. It may otherwise cause
the mesh filter to become clogged.
Always use the cleaner with filters installed.
NOTICE:
Using the cleaner without filters may result in a motor malfunction.
NOTICE:
Empty the dust case in the cyclone unit
when dust has accumulated. Continuing use will
result in weakened suction force.
The cyclone unit helps reduce the amount of dust that
enters into the cleaner, enhancing the suction perfor-
mance with simple and easy dust disposing.
4
2
3
Cleaning (Suction)
Nozzle
With 250 mL dust case only
Attach the nozzle to clean off tables, desks, furniture,
etc. The nozzle slips on easily.
1
Fig.10
► 1. Nozzle
Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor in a standing position.
Fig.11
► 1. Cleaner body 2. Extension wand (Straight pipe) 3. Nozzle
Sash nozzle
Fit on the sash nozzle for cleaning corners and crevices
of a car or furniture.
2
1
Fig.12
► 1. Sash nozzle 2. Cleaner body
8 ENGLISH
1
2
3
Advertisement
Table of Contents
