Table of Contents
Advertisement
X5669WUP3 User's Manual
Version 1.0
3.3.3 Pickup and Release old
To release the old call and take the new call: R (dial tone) 1
3.3.4 Pickup and put old on hold
To place the old (current) call on hold and take the new call: R
(dial tone) 2
3.3.5 Switch between 2 active calls
To switch between the old and the new call: R (dial tone) 2
3.3.6 Timeout
When the customer receives a call when in a conversation,
and chooses to ignore the call waiting notification, the calling
party will receive a Busy signal after 24 seconds.
R0 shall also temporarily deactivate the call waiting service
for the rest of the active call. When the subscriber hangs up
the service shall automatically be activated again.
3.4 Three Party Conference
Three party conference can be invoked from Call waiting or
Enquiry services.
When the subscriber has two active calls, one on hold and
63
Advertisement
Table of Contents
