X5669WUP3 User's Manual
VI. Hardware Installation
Follow the steps below to set up your device:
Step 1: Connect one end of the ADSL cable to the LINE port of X5668 and
the other end to the ADSL wall outlet.
Step 2: Use a RJ-45 cable to connect one end to an ETHERNET port of
X5668 and the other end to the LAN or a PC with an Ethernet
adapter installed.
Step 3: Plug in the AC adapter to the AC power socket, and then
connect the DC jack to the POWER inlet of X5668. Push the
SWITCH button to turn it on.
Power Supply
2
3
Management
Terminal/
4 PC
7
Version 1.0
1
ADSL Outlet