Table of Contents
Advertisement
X5669WUP3 User's Manual
configure the LAN IP address, DHCP server and relay settings.
IP Address: Enter the IP address.
Netmask: Enter the subnet mask for the IP address.
Enable IGMP Snooping: To enable or disable IGMP Snooping by
this setting. When the setting is enalbe, the model will snoop IGMP
packets and set the related setting on switch to make sure the
packets form video server will be multi-casted to the join port not all
ports. This way will prevent the video streams generate packets
storm.
Enable DHCP Server: This setting to enable/disable DHCP server.
Start IP Address: Enter the first IP for the address pool.
End IP Address: Enter the last IP for the address pool.
Lease Time: Enter the value in hours definign how long an IP
address can be assigned to a host.
Enable DHCP Relay: This setting to enable/disable DHCP server.
Relay IP: Enter the IP address of the DHCP relay server.
4.3 NAT
There are three pages to set NAT related functions include
Virtual Servers, Port Triggering, DMZ Host. The following
sections will describe page by page.
4.3.1 Virtual Servers
Access "Virtual Servers" to enter the page below. This page is
used to open related ports for specific applications. This page
allows you to configure the port forwarding feature of this device.
This feature works in conjuction with NAT/PAT and the firewall.
30
Version 1.0
Advertisement
Table of Contents
