Absco J30082S Assembly Instructions Manual page 6

NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
=
CSJ
JOIN>> <<JOIN
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
= =
JOIN>>
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
HIGH-SIDE
CSJ
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082S 14/08/14
Absco Space Saver Shed
Model: J30082S
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
=
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
FINISHED CHANNEL
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
LOW-SIDE
JOIN>>
JOIN>> <<JOIN
= =
INSTRUCTIONAL
=
JOIN>>
DRILL 4 (2 PER A SIDE) HOLES
TO SECURE SECTIONS
TOGETHER USING NO. 30 DRILL.
(THESE SCREWS MAY HAVE TO
BE TEMPORARILY REMOVED
AND REPLACED DURING LATER
ASSEMBLY)
CUSTOMER SUPPORT - 800-305-4436
VIDEOS
=
SJ
PAGE 6