Table of Contents
Advertisement
ABSCO ASSEMBLY INTRODUCTION
The snap-tite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners .
PUSH
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
FASTENING SYMBOLS
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: J30082S 14/08/14
Absco Space Saver Shed
Model: J30082S
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
SNAP
T TE
i
After joining sheets together,
position channel over one end of the
sheets, gently tapping it over the
snaptite lugs, working along the
sheets to the other end.
PUSH
Each perimeter channel must finish flush
with the edges of the sheets. the snap-tite
system allows adjustment for this
process by simply tapping the channel
along the sheets until each end is neatly
flush.
CUSTOMER SUPPORT - 800-305-4436
INSTRUCTIONAL
VIDEOS
8/32" NUT & BOLT SET
Once constructed place
screw caps over fasteners
PAGE 10
Advertisement
Table of Contents
