Absco J30082S Assembly Instructions Manual page 16

Absco Space Saver Shed
INSTRUCTIONAL
VIDEOS
Model: J30082S
6. DOOR PANEL ASSEMBLY
91A
91A
INSERT 91A JAMBS UNDER THE CHANNELS AROUND THE DOOR
B
A
NOTE: 8/32" CSK Nuts and bolts (supplied) will require
enlarging the hinge hole using a 11/64" drill bit
USE 4 x 8/32" NYLOC BOLTS
TO SECURE PADBOLT TO
DOOR
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill holes with No. 30 Drill and secure
with screws
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082S 14/08/14 CUSTOMER SUPPORT - 800-305-4436
PAGE 16