Analog Adjustment; Phase - Wide IDP2800SQ User Manual

The "Advanced Setting" menu is to tune the analog signal and set up the source priority and basic menu lock.
It is protected by the password. When a 4-digit password asked, enter it using the encoder switch to turn to a
digit and push to select it. The user password is programmable at the user level. The factory default
passwords is :
User Password : 0000
It can be changed in the set up menu which is the submenu of "Advanced Setting". See the 3.3.4.2.5 to
change the user password. If user does not want others to access and to modify the setting values, change
the user password.
3.3.4.1

Analog adjustment

"Analog adjustment" is the submenu of "Advanced Setting", which adjusts the values related to analog
signal : phase, frequency, H-position and V-position. When the graphic card is firstly used, phase, frequency,
H-position and V-position may not be optimal values. It needs to modify dependant on an analog signal
source.
3.3.4.1.1

Phase

After selecting an analog adjustment menu, select a "phase" by turning menu/control knob and press
menu/control knob to the "phase" control menu. And, press menu/control knob to return to the analog
adjustment menu after adjusting.
Revision Status
V5.3
Title
Advanced Settings
IDP2800SQ
(SL28P2K)
Advanced Settings
Password : _ _ _ _
: Select : Move
Page No.
46 / 77
Issued Date
2009-06-08