Table of Contents Safety Instructions ....................2 Explanation of Graphical Symbols ................... 2 Precautions ........................3 On Safety ........................3 Your New LCD Monitor ..................5 Feature and Benefits ....................... 5 Unpacking Your Monitor ....................5 Regulatory Information ..................6 FCC Information .......................
Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR TO REDUCE THE RISK OF ELECTRIC SHOCK, CAUTION: DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. LCD MONITOR 54IJ E217340...
Safety Instructions Precautions On Safety 1. Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. 2. Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor ;...
Page 5
The lamps inside the display contain mercury which can pollute the environment if disposed carelessly. Please contact our nearest representative office or your local environmental office in case of disposal of this unit. Contact WIDE Corporation 456, Gomae-dong, Giheung-gu, Yongin-si, Gyeonggi-do 446-901, Republic of Korea (TEL : +82-31-218-1600 FAX : +82-31-274-7400) http://www.widecorp.com...
- Clear, Sharp and Crisp Image • Flexibility - Portrait/Landscape Display • Superior Spec - High Luminance/High Contrast Ratio - Wide Viewing Angle - Large Display Area (19˝) Unpacking Your Monitor When you unpack the LCD monitor, make sure that you have items below. Manual...
Regulatory Information FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Information Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3) Connect the 15-pin D-SUB (Analog) signal cable from PC Video connector to the Video port on the back for your monitor. 4) Turn the monitor on, and the turn on the computer. 5) Recommended resolution of IF1911C (PA19ASX) is SXGA, 1280 x 1024.
Adjusting Your LCD Monitor Warm-up Time All LCD monitors need time become thermally stable whenever you turn on the monitor after the monitor be turned off for a couple of hours. Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm (be on) for at least 20 minutes before making any screen adjustments.
Adjusting Your LCD Monitor Main User Controls Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the monitor. While you use these buttons to controls, an OSD shows you their change. User Controls Name Description...
Adjusting Your LCD Monitor OSD Function Controls Picture Input : Digital DVI, Analog RGB Dim Brightness Picture Adjusts the brightness of backlight. Dim Brightness : 0 Brightness Brightness : 0 Adjusts the brightness of PC RGB’s Contrast : 0 brightness. Contrast Adjusts the contrast of PC RGB’s contrast.
Page 13
Adjusting Your LCD Monitor Setup Input : Digital DVI, Analog RGB DICOM Mode Setup Changes the DICOM mode. User can select one mode among 5 DICOM modes. DICOM Mode : DICOM White (DICOM White, DICOM Blue, TEXT View : 0 sRGB, USER) Language : English...
Appendix Power Management This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. Power Management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.
Appendix Pin Assignments DVI-D Connector Signal Assignment Signal Assignment T.M.D.S Data 2– No Connection T.M.D.S Data 2+ 5V Power T.M.D.S Data 2 Shield Ground (for 5V) Hot Plug Detect No Connection No Connection T.M.D.S Data 0– DDC Clock T.M.D.S Data 0+ DDC Data T.M.D.S Data 0 Shield No Connection...
Appendix Troubleshooting No picture • Make sure that the power cord is completely connected. (See page 8.) • Make sure that the LCD monitor and computer power switch are on. • Check the signal cable connector for bent or pushed-in pins. The display image is too light or too dark.