Table of Contents
Advertisement
RRU3268
Installation Guide
Step 2 Install the RRU mounting brackets, as shown in
Figure 8-24 Installing the RRU mounting brackets
1.
2.
Step 3 Use a 16 mm (0.67 in.) M10 torque wrench to tighten the nuts to 40 N·m (354.03 lbf·in.) so
that the mounting brackets are secured onto the U-steel, as shown in
Issue 10 (2015-12-30)
Figure 8-23 Distance between the mounting brackets and the ground
NOTE
As shown in the figure above, it is recommended that the mounting kits be installed at a position
1200 mm (47.24 in.) to 1600 mm (59.06 in.) high above the ground. If the space is insufficient,
only the
3.5 Installation Clearance Requirements of an RRU
NOTE
Verify that the arrows on the mounting brackets are pointing up.
Adjust the position of the nut and remove one end of the square-neck bolt from the slot
on the auxiliary bracket.
Slide the mounting brackets onto the U-steel horizontally and insert the square-neck bolt
into the slot.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
needs to be provided.
Figure
8-24.
Figure
8 Installing the RRU
8-25.
64
Hide quick links:
Advertisement
Table of Contents
