BMW X3 xDrive20i 2013 Owner's Handbook Manual page 82

Controls
Arrival time
The provisional arrival time is dis‐
played if a destination was en‐
tered in the navigation system
before starting the journey.
A precondition is that the time is
correctly set.
Speed Limit Information
Description of speed limit information, see
page 78
Speed limit
Display of a speed limit where a warning is to be
issued when reached.
Repeat warning if the set speed limit was un‐
dershot once by at least 5 km/h, 3 mph.
Displaying, setting or altering limit
1. "Settings"
2. "Speed"
3. "Warning at:"
4. Turn the controller until the desired limit is
displayed.
5. Press the controller.
The speed limit is saved.
Activating/deactivating the speed limit
1. "Settings"
2. "Speed"
3. "Warning"
4. Press the controller.
82
Displays
Online Edition for Part no. 01 40 2 900 867 - 03 12 490
Saving actual speed as limit value
1. "Settings"
2. "Speed"
3. "Select current speed"
4. Press the controller.
The current driving speed is saved as the
limit.
Journey computer
Two types of on-board computer are available.
▷ "On-board computer": values can be reset
any number of times.
▷ "Journey computer": values deliver an over‐
view of the current trip.
Resetting the journey computer
1. "Vehicle information"
2. "Journey computer"
3. "Reset": all values are reset.
"Reset automatically": all values are reset if
the vehicle is at a standstill for approximately
four hours.
Display on the control display
Display the on-board computer or journey com‐
puter on the control display.
1. "Vehicle information"
2. "On-board computer" or "Journey
computer"