If there is a short distance to an object at the
front, a red bar in front of the vehicle is displayed
in the same way as for the PDC display.
The display appears as soon as Top View is ac‐
tivated.
If the image from the rear-view camera was last
selected, this is displayed again. To switch over
to Top View:
"Rear view camera" Select the symbol on
the control display.
The setting is saved for the remote control cur‐
rently in use.
Display on the control display
Switching on the rear-view camera via
iDrive
With Top View switched on:
"Rear view camera"
The image from the rear-view camera is dis‐
played. The setting is saved for the remote con‐
trol currently in use.
Brightness
With Top View switched on:
1.
"Brightness"
2.
Turn the controller until the desired setting
is reached and press the controller.
Contrast
With Top View switched on:
1.
"Contrast"
Online Edition for Part no. 01 40 2 900 867 - 03 12 490
Driving comfort
2.
Turn the controller until the desired setting
is reached and press the controller.
Displaying the turning circle and
driving lane line
▷
The static red turning circle line indicates
the space requirement to the side with full
steering angle.
▷
The variable green driving lane line helps to
estimate the actual space requirement to
the side.
The driving lane line depends on the current
steering angle and is continuously adapted
to steering wheel movements.
"Parking help lines"
The turning circle and driving lane lines are dis‐
played.
Cameras
The lenses of the Top View cameras are located
in the base of the exterior mirror housings. Dirt
can impair the quality of the picture.
Clean the lens, see page 280.
Controls
115