What To Do If - BMW X3 xDrive20i 2013 Owner's Handbook Manual

X3 series 2013
Table of Contents

Advertisement

Update while the vehicle is in motion, to save
the battery.
Only the basic functions of the navigation
system are available while an update is in
progress.
You can check the status of the update proc‐
ess.
After updating, the system reboots.
Remove the media with navigation data after
updating.
Professional navigation system:
updating
1.
Insert navigation DVD into the DVD player
with the labelled side upwards.
2.
Follow the instructions on the control dis‐
play.
3.
Enter activation code for the navigation
DVD.
4.
Change the DVD as needed.
After interrupting the journey, follow the instruc‐
tions on the control display.
Business navigation system: updating
1.
Insert a USB medium with navigation data
into the USB interface in the glove box.
2.
Follow the instructions on the control dis‐
play.
3.
Enter the activation code of the USB me‐
dium with navigation data.
4.
Drive off.
After driving away, the system restarts and up‐
dates the navigation data while the vehicle is in
motion.
The update resumes automatically in the back‐
ground when you continue your journey.
Checking status
1.
Press the button.
2.
"Navigation update"
Online Edition for Part no. 01 40 2 900 867 - 03 12 490
Navigation system

What to do if...

The current position cannot be displayed.
The car is in an area not covered by the data,
is in a poor reception area or the system is
currently calculating the position. Reception
will normally be possible outdoors.
A destination without a street is not trans‐
ferred to the route guidance system.
No city centre can be determined for the
place entered.
Enter any street in the place selected and
start route guidance.
A destination is not transferred to the route
guidance system.
The data for the destination is not available
in the navigation data. Choose a destination
as close as possible to the original one.
Letters cannot be selected for destination
input.
The data stored do not contain the destina‐
tion data.
Choose a destination as close as possible to
the original one.
Map view shown in grey scales?
"Traffic situation/grey map" Active: indica‐
tions on the Control Display are toggled to
grey-scale. This facilitates optimum traffic
information display.
Spoken instructions cease to be given im‐
mediately before junctions during route
guidance?
Area is not fully recorded, or you have devi‐
ated from the suggested route and the sys‐
tem requires a few seconds to calculate a
new route.
Navigation
171

Advertisement

Table of Contents
loading

Table of Contents