Automatic Programmes - Electrolux EBSL7 User Manual

14 www.electrolux.com
Setting the clock functions
1. Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Press a sensor field to stop the signal.
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automati-
cally activate and deactivate the appli-
ance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
7.1 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
tivates after the baking or roasting proce-
dure ends.
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to the Safety chapters.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you can-
not change them.
Activating the function:
1. Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
again and again until the
or to set the necessary
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable for all heating functions with
Duration or Weight Automatic .
• Not applicable for heating functions
with Core Temperature Sensor.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press any
sensor field.
2. The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or
4. Set the Extra Time period. Press OK
to confirm.
3.
Select the category and dish. Press
OK to confirm.
4. Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses automatic
settings. You can change them as
with other functions.
to cancel).