Panasonic TH-55LFV70U Operating Instructions Manual page 70

Options Adjustments
Item
Locks the input switch operation.
Off
Input lock
Notes:
• Only the adjusted signal is displayed.
• Input switch can be used when this is set to "Off".
Off
Off: All the buttons on main unit can be used.
MENU: Locks
On: Locks all the button on main unit except the POWER button.
Button lock
Sets Button lock with the unit buttons in the following procedure.
Off: Press + four times→Press INPUT four times→Press - four times→Press MUTE
MENU: Press MUTE four times→Press + four times→Press INPUT four times→Press MUTE
On: Press - four times→Press MUTE four times→Press + four times→Press MUTE
Off
Off:
Remocon User level User1: You can only use
User2: You can only use
User3: Locks all the buttons on remote control.
Off
Off:
PC Auto Setting
On:
Enable:
Off-timer function Disable: Disables the "Off-timer function".
Note:
Normal
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal: Power returns in as the same state as before the power interruption.
Initial Power Mode
Standby: Power returns in standby mode. (Power Indicator : red/orange)
On:
Note: When using multiple displays, "Standby" is preferred to be set in order to reduce a power load.
Off:
On:
The clock is displayed at the lower left of the screen when
Clock Display
Select the LAN control protocol.
LAN Control
Protocol 1: Control with the Panasonic Display sequence.
Protocol
Protocol 2: Control with the sequence that compatible with Panasonic Projector.
Information Timing Set up the informing manner if error warning occured.
Set the lock setting for POWER button in unit buttons on back of the display.
Off: POWER button operation is enabled.
POWER Button Lock On: POWER button operation is disabled.
(TH-55LFV70U only)
Note:
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User Level" or
"Controller ID function" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
[ ]
"Shipping" menu is displayed and the lock is released when it disappears.
70
HDMI DisplayPort
VIDEO USB Off
On MENU
button on main unit.
MENU
User1 User2
You can use all of the buttons on the remote control.
On
When the AUTO SETUP key of the remote control is operated, or when the "Auto setup" of the
POSITION menu is performed, the Auto function operates.
In addition to operation of a remote control and the OSD menu, an Auto Setup function is dynamically
perfomed to the first signal to recieve.
Enables the "Off-timer function".
When "Disable" is set, the Off-timer is cancelled.
On Standby
Power returns in power On. (Power Indicator : green)
Not display the clock.
Display the clock.
Note: When "Day/Time settings" is not set, the clock is not displayed even if
1 0 : 0 0
This function is enabled for only TH-55LFV70U. For TH-55LFV70W, it will not appear on the menu.
Adjustments
DIGITAL LINK
User3
, , , , , buttons on the remote control.
and button on the remote control.
"Clock Display" is "On".
button on the remote control and hold for more than 5 seconds. The
DVI-D1 DVI-D2 PC
button is pressed.
COMPONENT/RGB