Panasonic TH-55LFV70U Operating Instructions Manual page 44

SETUP
MPEG Noise reduction
Reduces block noise and mosquito noise on MPEG videos.
Press to select "MPEG Noise reduction".
Press to select "Off", "Min", "Mid", "Max".
Signal Range
Switches the dynamic range according to the input signal from HDMI, DIGITAL LINK, DVI-D or DisplayPort terminal.
Press to select "Signal range".
Press to select "Video(16-235)", "Full(0-255)", "Auto".
Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between "Video(16-235)" and "Full(0-255)" according to the input signal.
Note:
• This function can be set to the HDMI, DisplayPort, and DIGITAL LINK signal.
Sync
This function operates only during input from PC IN terminal.
Press to select the "Sync".
Press to select "Auto", "on G" or "on Y".
Setting RGB/PC sync signal
[Auto]: The H and V sync or synchronized signal is automatically selected. If both of them have sync, H and V sync
will be selected.
[on G]: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Setting Component sync signal
[Auto]: The H and V sync or synchronized signal is automatically selected. If both of them have sync, H and V sync
will be selected.
[on Y]: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
• About RGB signals from "COMPONENT/VIDEO IN" terminal, accepts only the signals with "Sync on G".
44
MPEG noise reduction Off
MPEG noise reduction Auto
Signal range Full (0-255)
Sync Auto