Control Settings - Panasonic TH-55LFV70U Operating Instructions Manual

SETUP
Set up TIMER
Set the program for turning the power On/Off and select the input signal at the specified time. Up to 20 programs can be
set.
[Setting Example]
Program 1, Every Monday, 12:00, Power On, Input: VIDEO
Set up timer
Present time SUN
Program
Timer function
Day
Power mode Power on
Time
Input
Notes:
• This function cannot be set unless "PRESENT TIME Setup" is set.
• If more than one programs are set for the same time, only the program with the smallest program number is enabled.

Control Settings

Configure the settings for serial communication and remote control operation.
1
2
Serial control:
Sets which terminal to use for input for serial communication.
Options: SERIAL IN: SERIAL IN terminal
DIGITAL LINK: DIGITAL LINK terminal
Serial out:
Sets which terminal to use for output for serial communication.
Options: SERIAL OUT: SERIAL OUT terminal
DIGITAL LINK: DIGITAL LINK terminal
Note:
When "DIGITAL LINK" is set to "Serial control" or "Serial out", the power lamp lights orange when the remote
control power is switched "Off" (standby).
IR control:
Sets which terminal to use for remote control signal output.
Options: Built-in: built-in sensor
IR IN: IR IN terminal
DIGITAL LINK: DIGITAL LINK terminal
60
10 : 00
1
On
MON
12 : 00
VIDEO
select
1
adjust
2
Press to display the Setup menu.
Press to select "Control Settings".
Press the ENTER key to enter Control Settings.
1 Set the program number.
2
To execute the program, set to "On".
The program is disabled when "Off" is set.
3
Set the day.
The program is executed every day when "Everyday" is se
4
Set the power On/Off.
5
Set the time.
Pressing " " or " " button once changes "Time" 1 minute.
Pressing " " or " " button continuously changes "Time" by 15
minutes.
6
Set the input.
Setup
Set up timer
Day/Time settings
Control Settings
Network settings
USB media player settings
Function button settings
Display orientation
OSD position
Menu display duration
Menu transparency 20
Control Settings
Serial control
SERIAL IN
Serial out SERIAL OUT
IR control
IR out
Serial daisy chain position
Serial response(ID all)
Serial ID group
Serial response(group)
t.
2/2
Landscape
Upper/Right
60 sec
Built-in
IR OUT
---
Off
A
Off