Panasonic TH-55LFV70U Operating Instructions Manual page 61

IR out:
Sets which terminal to use for remote control signal output.
Options: IR OUT: IR OUT terminal
DIGITAL LINK: DIGITAL LINK terminal
Serial daisy chain position:
Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained.
---:
When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy
chain.
Top: To connect to the top of daisy chain.
End: To connect to the end of daisy chain.
Serial response(ID all):
Sets whether or not to return a response command when the serial command whose ID number is "0" has been
received.
Options: OFF: a response will not be returned.
ON: a response will be returned.
Serial ID group:
Groups display units and sets up groups, which you want to control via serial communication, when you do not
control each unit individually or all units simultaneously.
Example: If 9 display units are arranged in 3 lengthwise rows and 3 crosswise rows and you want to operate them
on a per-row basis.
Range: A to G (7 groups)
Serial respose(ID group):
Sets whether or not to return a response command when the serial command specifying a group has been
received.
Options: OFF: a response will not be returned.
ON: a response will be returned.
SETUP
61