Panasonic TH-55LFV70U Operating Instructions Manual page 68

SETUP
„ DIGITAL LINK status
Display the DIGITAL LINK connection environment.
Select "DIGITAL LINK status" and press
LINK status Either "No link", "DIGITAL LINK", or "Ethernet" will be displayed.
No link : No LAN connection, etc.
DIGITAL LINK : Connected to the DIGITAL LINK device by LAN
Ethernet : The PC is connected to the DIGITAL LINK terminal of this product and is LAN connected
HDMI status
Either "No HDMI", "HDMI ON", or "HDCP ON" will be displayed.
No HDMI : DIGITAL LINK not connected
HDMI ON : DIGITAL LINK connected
HDCP ON : A signal with an HDCP is flowing with a DIGITAL LINK connection.
Signal quality It is the quantified minimum and maximum numbers of errors that have occurred. The display
colours are red, yellow, or green, depending on the number.
The number is represented by yellow or red if the LAN cable is disconnected or the cable is
not shielded. This signal quality shows figures between the twisted pair cable transmitter that is
connected and the display.
Signal Quality
-12dB or below
-11 to -8dB
-7dB or above
„ Digital Interface Box
A switch will be made to the Set up Digital Interface Box menu when "Digital Interface Box" is selected and
pressed.
Note:
• This function can only be selected when the Digital Interface Box (ET-YFB100) made by our company is connected
to a LAN terminal and its power is on.
68
DIGITAL LINK status
LINK status
. HDMI status
Signal quality
Min
Max
Display Colours Reception Status
Green The reception is normal
Yellow Part of the received
data is corrupted
Red There are reception
difficulties
No link
No HDMI
-0 dB
-0 dB
is