RAM promaster 2017 User Manual page 51

NOTE:
In order to ensure proper operation, the Electronic Speed Control System has been
designed to shut down if multiple Speed Control functions are operated at the same
time. If this occurs, the Electronic Speed Control System can be reactivated by
rotating the Electronic Speed Control ON/OFF center ring and resetting the desired
vehicle set speed.
To Activate
Rotate the center ring upward on the electronic speed control lever to turn the system
ON. The Cruise Indicator Light in the instrument cluster display will illuminate. To
turn the system OFF, rotate the center ring upward a second time. The Cruise
Indicator Light will turn off. The system should be turned off when not in use.
Leaving the Electronic Speed Control system on when not in use is dangerous. You
could accidentally set the system or cause it to go faster than you want. You could
lose control and have an accident. Always leave the system OFF when you are not
using it.
To Set A Desired Speed
Turn the Electronic Speed Control ON. When the vehicle has reached the desired
speed, move the electronic speed control lever upward SET(+) and release. Release
the accelerator and the vehicle will operate at the selected speed.
NOTE:
The vehicle should be traveling at a steady speed and on level ground before moving
the electronic speed control lever upward SET(+).
To Deactivate
A soft tap on the brake pedal, pushing the RES button, or normal brake pressure
while slowing the vehicle will deactivate Electronic Speed Control without erasing the
set speed memory. Rotating the center ring upward to turn the system OFF or turning
the ignition switch OFF erases the set speed memory.
To Resume Speed
To resume a previously set speed, push the RES button and release. Resume can be
used at any speed above 20 mph (32 km/h) up to the maximum speed of 100 mph
(160 km/h).
O P E R A T I N G Y O U R V E H I C L E
WARNING!
49