Westell.com - Westell Technologies PS71090 User Manual

Item #
6
Item #
7
Item #
8
©2017 Westell Technologies
1.877.844.4274
Downlink
Gain [dB] Displays downlink gain in the 700 MHz range
ALC Atten [dB] Displays attenuation value by ALC
Atten [dB] Displays attenuation value controlled by down link
AGC Atten [dB] Displays attenuation value controlled by AGC
AGC Control Auto Level Control Function On/Off
Sets the unit's maximum ALC output value
AGC Level [dBm]
HPA Down link HPA On/Off
Gain (dB) Displays status of the uplink gain
ALC Atten [dB] Displays attenuation value controlled by ALC
Atten [dB] Sets the attenuation value
AGC Atten [dB] Displays attenuation value controlled by AGC
AGC Control Auto Gain Control Function On/Off
Sets the unit's maximum AGC output value
AGC Level [dBm]
HPA Uplink HPA On/Off
Isolation
Isolation Value
Isolation
Isolation Recheck
Note: Neither the isolation check nor recheck will indicate a change in power
levels if the unit's own power has been switched off.
Section
Section
Section
When power is on, an isolation check is performed
and the values display.
The isolation check can be performed with the RF on
or off.
The isolation check can be performed with the RF on
or off.
PS71090 Product Manual
March 2017, Rev G

WESTELL.COM

March 2017; Doc No. CS14702802UM rG
Page 43 of 50