System Operation; Operating The Program; Figure 6-1: Network Connection Set-Up - Westell Technologies PS71090 User Manual

6 System Operation

6.1 Operating the Program

Access the PS71090 Public Safety Signal Booster using the provided PS71090 PS-SMR 700/800
software through a LAN connection. The Signal Booster ships with the IP address 192.168.10.150 on
the GUI port.
To connect directly to the Signal Booster from a laptop or PC with a crossover CAT-5E cable or over a
LAN, change the TCP/IP settings on your computer to enable a connection to a host that has a static
IP.
1) Select Use the following IP Address and enter the IP address 192.168.10.x, where
'x' is any number from 2 to 254, inclusive, other than 150.
2) Ensure that the subnet mask is set to 255.255.255.0.
Refer questions about these settings to your IT department.
©2017 Westell Technologies
1.877.844.4274
Open Control Panel\All Control Panel Items\Network Connections
Choose appropriate Local area connection:
Figure 6.1: Network Connection Set-up
e.g. Set Computer IP to 192.168.10.2
NOTE
PS71090 Product Manual
March 2017, Rev G
WESTELL.COM
March 2017; Doc No. CS14702802UM rG
Page 34 of 50