5.8
Connecting the Power Cable
Use the provided AC Power Cable to connect the PS71090 Public Safety Signal Booster to an AC
power source.
1.
2.
The Signal Booster connector and the cable connector are keyed as shown in Figure 5-7.
©2017 Westell Technologies
1.877.844.4274
Remove the cap from the AC 110V power connector on the Signal
Booster, Figure 5-6.
Figure 5-6: Remove the Power Connector Cap
Connect the power cable to the AC 110V power connector on the Signal
Booster, Figure 5-7.
Figure 5-7: Connector Keys
NOTE
PS71090 Product Manual
March 2017, Rev G
WESTELL.COM
March 2017; Doc No. CS14702802UM rG
Page 31 of 50