Status; Figure 6-5: Status Mode - Westell Technologies PS71090 User Manual

6) Verify that the IP address in the upper left of the page is correct 192.168.10.150, if it is not, edit
it in the IP Address field.
7) Click the Connect button. The button label changes to Disconnect.

6.2 Status

Clicking the Status button in the menu on the left of the page changes the button text to
and displays the Status Mode page, described in this section.
Item #
1
©2017 Westell Technologies
1.877.844.4274
Figure 6-5: Status Mode Page
System Not User-Configurable/Informational Only
Displays the Signal Booster's manufacturer
Manufacture
Signal Booster Type Displays Signal Booster Model Number
Signal Booster S/N Displays Signal Booster Serial Number
S/W Version Displays firmware version of the control board
Temperature Displays internal temperature of the Signal
Booster
PS71090 Product Manual
March 2017, Rev G
Section
WESTELL.COM
March 2017; Doc No. CS14702802UM rG
Page 36 of 50