Rear Assist "Rear View Camera - Seat Arona Owner's Manual

The braking while manoeuvring function is
controlled in the Easy Connect system with
the menu and the
SETTINGS

function buttons.
Park and manoeuvre
●  on – permits the use of the braking
while manoeuvring function.
●  off – does not permit the use of the
braking while manoeuvring function.
Temporary suppression of emergency brak-
ing
● When the function is deactivated with the
Braking while manoeuvring
on the Parking System screen of the Easy
Connect system.
● Whenever any of the car doors, rear lid or
bonnet are opened.
Rear Assist "Rear View Cam-
era"*
Related video
Fig. 219
246
Operating and safety warnings
and
WARNING
● The Rear Assist does not make it possible
to precisely calculate the distance from ob-
stacles (people, vehicles, etc.) and nor can it
overcome the system's own limits, hence us-
ing it may cause serious accidents and inju-
ries if used negligently or without due care.
The driver should be aware of his/her sur-
roundings at all times to ensure safe driving.
The camera lens expands and distorts the
●
field of vision and displays the objects on the
screen in a different, vague manner. The per-
button that appears
ception of distances is also distorted by this
effect.
Due to the screen resolution or insufficient
●
light conditions, some items may be dis-
played in an unsatisfactory manner or not at
all. Take special care with thin posts, fences,
railings or trees that might not be displayed
on screen and could damage the vehicle.
The rear assist has blind spots where it is
●
not possible to represent people or objects
(small children, animals and certain objects
cannot be detected in its field of vision). Mon-
itor the vehicle's surrounding area at all
times.
● Keep the camera lens clean, free of ice and
snow, and do not cover it.
The system is not a replacement for driver
●
awareness. Supervise the parking operation
at all times, as well as the vehicle's surround-
Safety
ing area. Adapt your speed and driving style
Operation
at all times to suit visibility, weather, road
and traffic conditions.
● Do not be distracted from the traffic by
looking at the screen.
The images on the rear assist screen are
●
only two-dimensional. Due to a lack of spatial
depth, protruding parts or holes in the road,
for example, are more difficult to detect or
may not be seen at all.
Vehicle load modifies the representation of
●
the orientation lines displayed. The width
represented by the lines diminishes with ve-
hicle load. Pay special attention to the vehi-
cle's surroundings when the inside of the ve-
hicle of the luggage compartment is carrying
a heavy load.
● In the following situations, the objects or
other vehicles shown in the navigation sys-
tem display appear to be further away or
closer than they really are: Pay special atten-
tion:
On moving from a horizontal plane to a
–
slope.
On moving from a slope to a horizontal
–
plane.
If the vehicle is heavily loaded at the
–
rear.
When the vehicle approaches objects
–
that are not on the ground surface or are
jutting out from it. These objects may al-
so be outside the camera's angle of vi-
sion when reversing.