Introduction To The Easy Connect System - Seat Arona Owner's Manual

Examples of priority 1 warning messages
(red)
● Brake system symbol
message STOP BRAKE FLUID INSTRUC-
TION MANUAL or STOP BRAKE FAULT IN-
STRUCTION MANUAL .
● Coolant symbol with the warning mes-

sage STOP SEE COOLANT INSTRUCTION
.
MANUAL
● Engine oil pressure symbol
warning message STOP ENGINE OIL
PRESSURE LOW! INSTRUCTION MANUAL
Warning messages, Priority 2 (yellow)
If one of these faults occurs, the correspond-
ing warning lamp lights up and is accompa-
nied by an audible warning. Check the corre-
sponding function as soon as possible al-
though the vehicle may be used without risk.
If several priority 2 warning messages are de-
tected at the same time, the symbols are dis-
played one after the other for about 2 sec-
onds at a time. After a set time, the informa-
tion text will disappear and the symbol will
be shown as a reminder at the side of the
display.
Priority 2 warning messages will not be
shown until all Priority 1 warning messages
have been dealt with!
122
Examples of priority 2 warning reports (yel-
low):*
with the warning ● Fuel warning light with the information text

PLEASE REFUEL
WARNING
If the warning lamps and messages are ignor-
ed, the vehicle may stall in traffic, or may
cause accidents and severe injuries.
● Never ignore the warning lamps or text
with the

messages.
. Stop the vehicle safely as soon as possible.
●
● Park the vehicle away from traffic and en-
sure that there are no highly flammable ma-
terials under the vehicle that could come into
contact with the exhaust system (e.g. dry
grass, fuel).
● A faulty vehicle represents a risk of acci-
dent for the driver and for other road users. If
necessary, switch on the hazard warning
lamps and put out the warning triangle to ad-
vise other drivers.
Before opening the bonnet, switch off the
●
engine and allow it to cool.
● In any vehicle, the engine compartment is a
hazardous area and could cause severe inju-
›››
ries
CAUTION
Failure to heed the control lamps and text
messages when they appear may result in
faults in the vehicle.
Operation
.
page 273.
Introduction to the Easy
Connect system*
System settings (CAR)*
CAR menu
Read the additional information carefully
›››

page 34
To select the settings menus, depending on
the version, press the Easy Connect button
and the function button, OR
SETTINGS

press the  button and then
SETTINGS
The actual number of menus available and
the name of the various options in these me-
nus will depend on the vehicle's electronics
and equipment.
When the function button check box is activa-
ted , the function is active.
Pressing the menu button will always take

you to the last menu used.
Any changes made using the settings menus
are automatically saved on closing those me-
nus.
Menu Vehicle settings
ESC system
Tyres
.
Page
›››
page 181
›››
page 287